Why does my automatic pipe cutter always make a strange noise?

In the process of production, we occasionally hear the abnormal noise inside the pipe cutting machine, or the noise of gear meshing, or the harsh sound of bearing rotation and so on. It is recommended to check the machine immediately after these sounds appear. Your machine may be sick.

Figure 1: Automatic pipe punching machine

In normal automatic pipe cutting machine abnormal sound is more because of the wear of parts leading to size problems, and on the machine because of wear and failure of parts occupy most of the scrapped parts. Therefore, improving the wear resistance of automatic pipe tube cutting machine parts is an important measure to improve the life of automatic pipe cutting machine. The wear resistance of mechanical parts generally refers to the wear resistance of mechanical parts under the action of load. When the wear of these parts exceeds the allowed value, the size and shape will change, and the accuracy of the working face will decline, so that it can no longer maintain the specified function, leading to the failure of parts and problems in processing products. And the main reason for scrapping the machine also comes from the excessive wear of parts. So what do we need to do to minimize wear and tear?

If working under the condition of pollution and dust, it is necessary to add sealing or protective devices to prevent the dust in the air from falling into the machine and causing wear, and the easily worn part should be protected; The use of appropriate lubricants, additives, at the same time lubricants need to be fully supplied, full of transmission parts working face; Lubricating oil tank can not be too small, too small lubricating oil will be in short supply; The amount of grease added to the rolling bearing should not be too much; At the same time, we should also pay attention to the adjustment of parts wear, regular maintenance of the machine.